Skip to main content
x

TECHMart

MASTIC provides a platform for technology transfer to enhance the application of local technology towards the development of the country's S&T capabilities. This database contained information on local products or technologies with potential for commercialisation resulting from R&D activities. This showed a selected products or technologies in TECHMart database.

Type a word
Category of Technology / Product
Syaliza_pic

ID : tm204131460


FILTERING APPARATUS

THIS PROJECT PRESENTS BANANA TRUNK FIBER AS THE MAIN FILTERING LAYER IN A WASTE WATER FILTER SYSTEM. THE MAIN PURPOSE OF USING BANANA TRUNK FIBER IS BECAUSE IT WAS PROVED FROM PAST RESEARCH, THAT BANANA TRUNK FIBER HAS THE CAPABILITY TO ABSORB 70% TO 80% OIL AND GREASE IN SAMPLED WASTE WATER DEPENDING ON THE NATURE OF THE PROCESSED BANANA TRUNK FIBER THAT WAS USED AS A FILTER. KITCHEN SINK WASTE WATER OFTEN CREATE PROBLEMS SUCH AS CLOGGING IN THE SEWAGE SYSTEM, WATER POLLUTION AND ALSO INCREASE THE WORKLOAD OF A SEWAGE PLANT. THIS FILTER SYSTEM IS DESIGNED TO BE APPLIED IN DOMESTIC OR RESIDENTIAL KITCHEN SINK. THE APPLICATION OF THIS FILTERING SYSTEM NOT ONLY FILTERS OUT OIL AND GREASE BUT WILL ALSO REDUCE TURBIDITY, PH AND SUSPENDED SOLIDS OF THE WASTEWATER DISCHARGED INTO THE SEWAGE SYSTEM. IN CONCLUSION, THE USAGE OF BANANA TRUNK FIBER AS A FILTER HAS A SIGNIFICANT IMPACT IN REDUCING CLOGGING AND WORKLOAD OF SEWAGE TREATMENT PLANTS DUE TO HIGHER-LOAD GREY WATER FROM KITCHEN SINK.

Kulim Kedah

ID : tm3404015011


1. Research and Development of Metal-Graphite Brushes (Carbon Brushes) Through Powder Metallurgy Technique.

2. Development of collector shoe for light rail application.


- Produce carbon brushes or metal-graphite brushes using Powder Metallurgy technique. The brushes are the components that transfer electric current between stationary and rotating elements in electric motor and generators.

- Produce collector shoe (car

Kulim Kedah

ID : tm3404115012


A new toughening agent for termoset resins developed from natural rubber

A technique was developed to toughened thermoset resins using liquid natural rubber. The modified resin was proven to improve impact properties of composites.

Kulim Kedah

ID : tm3404215013


A simplified route in producing synthetic bone graft

Carbonated apatite which is similar to biological apatite was developed using a simplified processing route.

Kulim Kedah

ID : tm3404315014


Development of carbonated apatite material for possible biomedical implant purposes

Carbonated apative is the latest material being researched as a bone replement material. It has a close revemblance to bone mineral. It is a catepin phosphase-based bioceramic that contains carbonate. It has an excellent biocontabilish with hard tissue (bone) which makes them an excellent material for bone subsitute.
Advantage: Bone substitute material

Kulim Kedah

ID : tm3404415015


Development of powder metallurgy high speed steels component through additives Enhancement

Produce cutting tool inserts from high-speed steel powder particle hrough powder metallurgy technique.
Advantage:
- Ability to fabricate high quality & near net-shape products
- Minimise wastage of raw materials
- Cost reduction

Kulim Kedah

ID : tm3404515016


Development of Ti02 thin films by sol gel methol

Develop Ti02 thin films by sol gel technique for electrochromic devices.

Kulim Kedah

ID : tm3404615017


Development of Titanium and Titanium Alloy Plates for potential medical and dental application

Fracture fixation plates through powder metallurgy technique

Kulim Kedah

ID : tm3404715018


Development of Type 3 compresses natual gas (CNG) tank used in natural gas Vehicle (NGV) application

Cureently the cost to acquire CNG from abroad is high due to import costs. The high demand for current and future CNG cylinder for NGV vehicle is high as it is an alternative replacement for oil base energy vehicle. With the support from the Government , manufacturing of CNG cylinder locally will lower the cost. CNG carbon fibre which is lightweight and of high strength should give less maintenance for NGV operator and better operating cost in the long run.

Kulim Kedah

ID : tm3404815019


Environmental Friendly Binder System for MIM Process

To overcome at least some of the problems associated with other binder system such as blamrable, toxic and caranogenic, a composite brider system lad been successfully developed which consist of water soluble oligomer, PEE and PMMA. The news system has been successfully used for various retal powders.This binder is of cursively for use in environmentally friendly MIM feedstock formulated for water debuding.

Kulim Kedah

ID : tm3404915020


Fabrication of Fracture Fixation Plates for Orthopedic Applications

To counter the problems associated with conventional processes of producing implants, anew approach has been invented, which is the adaptation of the injection moulding process. With this technique in place, he have now taken a step for rapid manufacturing of fracture Fixation plates for the first time. The fracture plates produced using this technique company with the international standards. The advantages of this process are design flexibility and cost effectiveness.

Kulim Kedah

ID : tm3405015021


Hydrogen production system VIR renewable energy

Design system of the pem electrocycer for hydrogen production via water electrolysis process

Kulim Kedah

ID : tm3405115022


Research and Development of Alternative Brake Pad Materials

Pads with composite materials using Powder Metallurgy technique.

Kulim Kedah

Displaying 1 - 13 of 13

To Register New Technology and Product Click Here