Skip to main content
Type a word
Category of Technology / Product

ID : tm3407515046

Underground heat storage system using borehole heat exchanger.

This is an underground heat storage system. The objective of the system are to study the performance of utes under tropical cimate, to determine the efficiency of the chosen grout as heat storage media in the system and utilization of the heat capacity for continuous nocturnal drying.

Shah Alam Selangor

ID : tm3407615047

Solaerator for Sustainable Fish Farming

Solaerator is a seft-sustaining solar aeration system providing a continous supply of oxygen to a pond without the need of conventional power source. Sensing that oxygen is low, solaerator aotomatically turn on and compressed air is pumped through diffuser sunk into the bottom of the pond.

Shah Alam Selangor

ID : tm3407715048

Solaerator (Solar Aeration System)

Sistem pengudaraan solar dan pemantauan kualiti air untuk
kolam ternakan ikan air tawar.

Shah Alam Selangor

ID : tm3407815049

Sirim Karbon Kalkulator : Environmental Declaration Scheme for Construction and Building Materials

The carbon footprint calculator is a toolkit to support the calculation and certification of product footprints. ???Sirim Karbon Kalkulator??? has been developed to automate the calculation procedure and used by the auditor to verify the calculation process.

Shah Alam Selangor

ID : tm3407915050

SIRIM Karbon Kalkulator

Satu alat berasaskan web bertujuan untuk mengumpulkan
maklumat tentang kitaran hidup bahan pembinaan dan
bangunan di Malaysia. Alat ini digunakan untuk mengira jejak
karbon (carbon footprinting) produk yang dihasilkan supaya
dapat menggurangkan impak karbon terhadap alam sekitar.

Shah Alam Selangor

ID : tm3408015051

SimBionTeA (SIRIM Biogas & Tenaga Alternatif)

Teknologi memproses bahan organik yang boleh diaplikasikan dalam industri pemprosesan makanan.

A technology processes organic matter that can be applied in the food processing industry.

Shah Alam Selangor

ID : tm3408115052

Silinder gas petroleum cecair

Silinder diperbuat daripada bahan plastik yang
dibalut dengan lapisan bahan komposit yang
diperkuat melalui proses pembalutan filamen.
Prestasi silinder diuji berdasarkan standard BS EN

Shah Alam Selangor

ID : tm3408215053

Potential Application of Waste Rubber as A Binder in Metal Injection Moulding

The present invention provides a waste rubber binder-system for use in injection moulding of metal powders. Said binder composition comprises of a mixture of waste rubber and wax and may also include a thermoplastic back-bone polymer and lubricant. In Malaysia, about 500,000 tones of raw rubber are consumed annually in the making of various rubber products generating an export revenue about RM 9.0 billion. Latex products especially rubber gloves, dominated the export earning, contributing of RM 7.0 billion. Waste rubber products resulting from rubber products themselves have to be recycled for environmental purpose or value addition. Therefore this invention to apply the waste rubber products from the glove to be a binder in metal injection moulding process. In accordance with the present invention, though waste rubber binder is waste rubber powder was obtained from rejected gloves or waste gloves by mechanical grinding using crusher to get a polydispersed rubber powder. The waste rubber powder was sieved using seiver to get the particle size in the range of 100-400um.

Shah Alam Selangor

ID : tm3408315054

Phyto NLC

Anti-aging serum is produced using ginger extract.

Serum anti penuaan yang dihasilkan menggunakan ekstrak halia.

Shah Alam Selangor

ID : tm3408415055

Photopatternable Hybrid Organic-inorganic Sol-gel Materials for Planar Optical Waveguide Applications

The key success to produce planar circuitary technology is based on synthesis hybrid organic-inorganic sol-gel materials for photopatternable technique. The photopatterning process has a great potential as alternative photolithographic technique for the fabrication of micro-optical devices and photonic components. The new sol-gel formulations consist of Vinyltriethoxysilane: Tetraethoxysilane: Tetrabutoxytitanate (VTES:TEOS-TTBu) can be polymerized using UV irradiation rays. These film materials exhibit photopolymerizze towards UV irradiation rays by dissociates chelated titanate complex and photoinitiator that promote condensation of Ti-O-Si/Ti-O-Ti and formulation of organic network of Si(CH2)n Si , respectively. This method has contributed to cost effectiveness process in materials densification in which thermal treatment has been reduced from temperature of 1000C to approximately 250C.

Shah Alam Selangor

ID : tm3408515056

Palm-based Flux for Binary and Ternary Lead-free Solder Alloys

Soldering is a method of joining two or more metals together by using a filler metal, which has a lower melting temperature than the parent metals, and flowing the molten filler metal to the joint and then set to be hardened before a solid joint is established . In the case of electronic packages, solder pastes are commonly used as interconnect materials for attaching dies to lead-frame, as ball grid arrays (BGAs) to connect packaged integrated circuits chips as second or higher level packaging, and as flip-chip packages. Also solder pastes are also commonly used in electronic circuitry fixing at repair shops. This invention relates to a new flux-formulation for preparing of lead-free solder pastes which are either binary or ternary alloy in nature. The rosin content had instead been replaced by palm fatty acid distillate (PFAD) as the main carrier.

Shah Alam Selangor

ID : tm3408615057

Optical Biosendor Reader for Ammonium Detection

The reader enables a rapid detection and measurement of ammonium at sites. It uses bi-layer enzymes as biosensor that responses to the presence of ammonium upon exposure to light. It measures light intensity, processes and displays the concentration result on any android smartphone via bluetooth com.

Shah Alam Selangor

ID : tm3408715058

Nanopores Activated Carbon Rice Husk: Production And Application In Supercapacitors

The novelty of this works is the nanopores activated carbon production with very high surface area from the agricultural waste known as rice husk using the sequence steps of carbonization and activation processes that can be employed as carbon-based electrodes material for energy storage devices such as supercapacitors. These processes were applied as efficient ways to produce high porosity carbon. Activated carbon getting a great attraction to be used in energy storage due to high surface area and conductivity, temperature stability and also low cost as compared to other materials. moreover, the carbon source means rice husk is biomass that is more environmental friendly and large abundance for production. In response to the global climate issues, this approach can facilitate in overcoming problems associated with environmental issue such as biomass open burning and providing future energy storage demand by applying the activated carbon rice husk in the supercapacitors.

Shah Alam Selangor

ID : tm3408815059

Standard gantang model based on metric system for zakat payment in Malaysia

Gantang is a standard reference measure for volume used for determination of Zakat Fitrah and agricultural zakat nisab. NMIM of Sirim has calibrated several samples and invented a standard gantang model based on metric system. NMIM will also provide training modules for zakat executives and amils.

Shah Alam Selangor

ID : tm3408915060

Mylipos Composite Solar Streetlighting System

Mylipos composite solar Streetlighting System consist of two main components, Mylipos Lithium ion battery unit and composite pole structure. This two main components were specially design by SIRIM researchers to suit the applications as an easy to install, low maintenance and stand-alone system.

Shah Alam Selangor

ID : tm3409015061


MOLDCost is an intelligent mould costing system. This software is developed so that at the touch of a button, mould designers and mould makers can prepare mould quotation for their customers. The system pioneered a novel method to act as a decision support tool to provide possibilities for mould makers in pricing a mould related product. The customized software is flexible enough to suit any companies anywhere. The transparent method on how it generates the pricing means that the software can be used as a teaching aid and policy making tools for mould makers and mould designers.

Shah Alam Selangor

ID : tm3409115062

Malaysian Reference Material Gold(MYRM GOLD)

MYRM Gold was developed by national metrology institute of Malaysia (NMIM) aims to ensure the equipment used for measuring purity of gold is accurate and uniform. Through this invention, the gold industries, pawn institution and consumer will benefits of fair trade activities.

Shah Alam Selangor

ID : tm3409215063

Innovative Fabrication Method Of Photonic Integrated Circuit

One of the key success factors to produce planar optical waveguiding devices is the technique of pattern transfer for the fabrication of photonic integrated channel structure. This invention is in the form of improving pattern transfer without involving deposition of photoessist as compared to current expensive equipment and time consuming photolithography process. This technique eliminates the high risk of channel contamination from residual photoresist for fabricant of silica based optical channel waveguides. This invention also relates to a method of preparing a cost effective process in materials densification in which thermal treatment has been reduced from temperature of 1000 Celsius to approximately 250 Celsius. This technique is simple, not only reducing the process steps, but also the manufacturing time and the cost effective for large scale production.

Shah Alam Selangor

ID : tm3409315064

Improved HF Antenna Design for Wireless Authentication

The usage of High Frequency (HF) antenna in RFID application can be seen widely in the industries of security especially for product authentication, door access, wireless payment, library and asset identification. Due to its relatively high wavelength, the need for antenna size reduction for mobile platform has become a challenging problem.This project presents the development of HF spiral typed antenna that is for use with our HF reader prototype for handheld applications. Its size was reduced to 65mmx90mm and it was fabricated on a double sided FR4 PCB. The antenna was first designed using a CST Microwave and Design Studio to set the boundary and energy profile and then its behavior was simulated. The value of inductors and capacitors were varied in order to get the correct parameter for return loss, VSWR and impedance matching. By using the Vector Network Analyser (VNA), these values were further returned so that optimum communication reading distance between the tag and the reader can be achieved. With the improved antenna design, the reading and writing distance has been greatly enhanced.

Shah Alam Selangor

ID : tm3409415065

High Speed and High Precision Optical Dicing Machine

Optical dicing machine is a new simultaneous programmable 5-axis machine invented to solve problem in fabrication process of photonics planar optical waveguide which its end sides need to be cut, straight or slanted, accurately & precisely, using high speed spindle to get high surface high quality.

Shah Alam Selangor

ID : tm3409515066

High Accuracy Approach in TINT Measurement (MYRM Tint)

To support road and transport act. Through this development, it harmonize the coefficient detector responsivity and consequently performance albeit of different manufacture. Through this development which has defined stability and sufficiently homogenous.

Shah Alam Selangor

ID : tm3409615067

Harmonisation of Opacity Measurement in Malaysia (MYRM Opacity)

The development of MYRM Opacity is based on defined material, sufficiently homogeneous and high stability which been established. Hence the identification of relevant materials performance need to be quantified through rigorous experiment procedures. Therefore, its determine the quality and accuracy.

Shah Alam Selangor

ID : tm3409715068


Pencanaian persis dengan 8 orientasi yang boleh mencapai ketepatan dimensi sehingga 2 miu (0.002mm) dan kekasaran permukaan (surface roughness) boleh dicapai sehingga 0.02 miu bagi material Tungsten Carbide

Shah Alam Selangor

ID : tm3409815069

Green NGV Save

This system is designed to reduce the rate of vehicle maintanance(petrol/CNG vehicle) by controlling the petrol/CNG and monitoring the temperature & rotation speed of the engine

Shah Alam Selangor

ID : tm3409915070

Glue Stick

Process involves heating of crucial raw materials in jacketed reaction vessel. Continuous stirring to archive a homogenous mixture.Perfume added to give a pleasant smell (final).The viscous solution poured into sticks - allowed to cool and harden

Shah Alam Selangor

Displaying 1 - 25 of 51

To Register New Technology and Product Click Here