Skip to main content
Type a word
Category of Technology / Product

ID : tm3318514156


Intelligent Real-time integrated system for sustainability(IRISS)

Intelligent real time integrated system for sustainability(IRISS) is designed to transform the collecting data method to measure the impact towards the environment before, during and after the development. IRISS provides the data directly through the internet of things(IOT), cloud computing and web.

Kuala Kangsar Perak

Syaliza_pic

ID : tm204131460


FILTERING APPARATUS

THIS PROJECT PRESENTS BANANA TRUNK FIBER AS THE MAIN FILTERING LAYER IN A WASTE WATER FILTER SYSTEM. THE MAIN PURPOSE OF USING BANANA TRUNK FIBER IS BECAUSE IT WAS PROVED FROM PAST RESEARCH, THAT BANANA TRUNK FIBER HAS THE CAPABILITY TO ABSORB 70% TO 80% OIL AND GREASE IN SAMPLED WASTE WATER DEPENDING ON THE NATURE OF THE PROCESSED BANANA TRUNK FIBER THAT WAS USED AS A FILTER. KITCHEN SINK WASTE WATER OFTEN CREATE PROBLEMS SUCH AS CLOGGING IN THE SEWAGE SYSTEM, WATER POLLUTION AND ALSO INCREASE THE WORKLOAD OF A SEWAGE PLANT. THIS FILTER SYSTEM IS DESIGNED TO BE APPLIED IN DOMESTIC OR RESIDENTIAL KITCHEN SINK. THE APPLICATION OF THIS FILTERING SYSTEM NOT ONLY FILTERS OUT OIL AND GREASE BUT WILL ALSO REDUCE TURBIDITY, PH AND SUSPENDED SOLIDS OF THE WASTEWATER DISCHARGED INTO THE SEWAGE SYSTEM. IN CONCLUSION, THE USAGE OF BANANA TRUNK FIBER AS A FILTER HAS A SIGNIFICANT IMPACT IN REDUCING CLOGGING AND WORKLOAD OF SEWAGE TREATMENT PLANTS DUE TO HIGHER-LOAD GREY WATER FROM KITCHEN SINK.

Kulim Kedah

ID : tm3404015011


1. Research and Development of Metal-Graphite Brushes (Carbon Brushes) Through Powder Metallurgy Technique.

2. Development of collector shoe for light rail application.


- Produce carbon brushes or metal-graphite brushes using Powder Metallurgy technique. The brushes are the components that transfer electric current between stationary and rotating elements in electric motor and generators.

- Produce collector shoe (car

Kulim Kedah

ID : tm3404115012


A new toughening agent for termoset resins developed from natural rubber

A technique was developed to toughened thermoset resins using liquid natural rubber. The modified resin was proven to improve impact properties of composites.

Kulim Kedah

ID : tm3404215013


A simplified route in producing synthetic bone graft

Carbonated apatite which is similar to biological apatite was developed using a simplified processing route.

Kulim Kedah

ID : tm3404315014


Development of carbonated apatite material for possible biomedical implant purposes

Carbonated apative is the latest material being researched as a bone replement material. It has a close revemblance to bone mineral. It is a catepin phosphase-based bioceramic that contains carbonate. It has an excellent biocontabilish with hard tissue (bone) which makes them an excellent material for bone subsitute.
Advantage: Bone substitute material

Kulim Kedah

ID : tm3404415015


Development of powder metallurgy high speed steels component through additives Enhancement

Produce cutting tool inserts from high-speed steel powder particle hrough powder metallurgy technique.
Advantage:
- Ability to fabricate high quality & near net-shape products
- Minimise wastage of raw materials
- Cost reduction

Kulim Kedah

ID : tm3404515016


Development of Ti02 thin films by sol gel methol

Develop Ti02 thin films by sol gel technique for electrochromic devices.

Kulim Kedah

ID : tm3404615017


Development of Titanium and Titanium Alloy Plates for potential medical and dental application

Fracture fixation plates through powder metallurgy technique

Kulim Kedah

ID : tm3404715018


Development of Type 3 compresses natual gas (CNG) tank used in natural gas Vehicle (NGV) application

Cureently the cost to acquire CNG from abroad is high due to import costs. The high demand for current and future CNG cylinder for NGV vehicle is high as it is an alternative replacement for oil base energy vehicle. With the support from the Government , manufacturing of CNG cylinder locally will lower the cost. CNG carbon fibre which is lightweight and of high strength should give less maintenance for NGV operator and better operating cost in the long run.

Kulim Kedah

ID : tm3404815019


Environmental Friendly Binder System for MIM Process

To overcome at least some of the problems associated with other binder system such as blamrable, toxic and caranogenic, a composite brider system lad been successfully developed which consist of water soluble oligomer, PEE and PMMA. The news system has been successfully used for various retal powders.This binder is of cursively for use in environmentally friendly MIM feedstock formulated for water debuding.

Kulim Kedah

ID : tm3404915020


Fabrication of Fracture Fixation Plates for Orthopedic Applications

To counter the problems associated with conventional processes of producing implants, anew approach has been invented, which is the adaptation of the injection moulding process. With this technique in place, he have now taken a step for rapid manufacturing of fracture Fixation plates for the first time. The fracture plates produced using this technique company with the international standards. The advantages of this process are design flexibility and cost effectiveness.

Kulim Kedah

ID : tm3405015021


Hydrogen production system VIR renewable energy

Design system of the pem electrocycer for hydrogen production via water electrolysis process

Kulim Kedah

ID : tm3405115022


Research and Development of Alternative Brake Pad Materials

Pads with composite materials using Powder Metallurgy technique.

Kulim Kedah

ID : tm3484015467


From Waste to Wealth : Utilisation of Waste Plastic as an EcoFriendly Binder System for Metal Moulding (MIM) Industry

The key to the successful application of metal injection moulding (MIM) process in production practice is the selection of a binder system together with a suitable debinding procedure. There are various binder-system that have been developed for use MIM industries which include the use of major fraction of petroleum-based binder and waxes.

However, there are problems associated in the use of the said binder-systems. To overcome at least some of the problems associated with the other systems, an eco-friendly composite binder based on recycling materials were successfully developed SIRIM Berhad that consist of plastic waste in powder form which was obtained from waste of polyolefin (such as mineral water bottle, plastic container etc)

Kulim Kedah

ID : tm3498715614


E-Submission

This system will provide an electronic submission method of capturing and approving electronic and paper documents for building and development plan application. Thus it can also monitor the movement of the submission. The system is also capable to handle electronic document management. Community Portal is also crated to provide general and public information, public complaint and suggestion and progress monitoring on the PBT services.

Kulim Kedah

ID : tm3509815725


Terminalia Catappa Crystal Filter (natural material)

This filter is designed based on two main material, Terminalia catappa leaves and crystals. Both materials are placed into layer separately. The combination of both materials can reduce pH value so that the water suitable for cleaning purpose.

Kulim Kedah

ID : tm3517415801


Chromolaetics: The Power of Wound Healing

Chromolaetics' is purposed to heal wounds with use of Chromolaena Odorata, which is known as traditional medication. These products consist of filtered water, canton C.G., Chromolaena Odorata leaves extract and olive oil. These products are green invention, because of our secret organic contents.

Kulim Kedah

ID : tm3524615873


Chopper Mixer for Making Brake Lining Material

Friction materials typically composed of four main constituents; fiber, resin, filler and additive. The materials in powdery form, mixed and cast into brake linings under high temperature and pressure.

Mixers available in the market are specific to powdery and dry materials that do not stick to each other or to the wall of the mixer. The brake lining meterial composition is powdery but has some tendency to form lumps or stick to the wall of the mixer that will cause inconsistency to the mixture. None of the mixers that are currently available in the market can produce homogenius mixture.

Kulim Kedah

ID : tm3524715874


Hard Thin Film Coating on Cutting Tools

Cathodic Arc physical Vapour Deposition (CAPVD) technique is used to deposit hard and resistant layer thin films of about 1-10 pm. This Coating is used to improve friction, wear and life of cutting tools, mould and dies, machine elements, automotive parts.

Hard thin film nanostructured composite caoting to improve surface property using CAPVD.

Kulim Kedah

ID : tm3508615713


Velcro Shoes

The consumer required a different set of shoes for the daily activities such as sport, casual etc. Thus, is a need to provide a shoes specially designed for various different heel and can be changed easily to suit the tide of activity. Indirectly preserve the environment of rubber waste from shoes.

Merlimau Melaka

Displaying 1 - 21 of 21

To Register New Technology and Product Click Here