Skip to main content
x

TECHMart

MASTIC provides a platform for technology transfer to enhance the application of local technology towards the development of the country's S&T capabilities. This database contained information on local products or technologies with potential for commercialisation resulting from R&D activities. This showed a selected products or technologies in TECHMart database.

Type a word
Category of Technology / Product

ID : tm3007411045


A Board And Its Production Method

"The primary object of the present invention is to invent a board which is high strength and low cost. The board shall compose of agricultural wastes which need not be ground into particles and hence eliminate the use of a grinder. Even though without grinding the waste materials, the board can still have high strength due to original material particle size at its maximum and this reduces the use of more expensive material such as binder and hardener.
Another object of the present invention is to invent a board produced from various organic agricultural wastes which are abundant, biodegradable, reusable and inexpensive. As a result, the amount of wastes disposal into the environment can be reduced.
At least one of the preceding objects is met, in whole or in part, by the present invention, in which the embodiment of the present invention describes a method of producing board comprising mixing agricultural wastes of rice husks, rice straws, bagasses, banana leaves and the like with a binder and a hardener and compressing said mixture at a temperature ranging from 100??C to 200??C under pressure of 120 kg/cm2 to 200 kg/cm2 in a time period of 10 minutes to 40 minutes. "

Jejawi Perlis

ID : tm3007511046


Concrete Sludge Brick

Concrete Sludge Brick is made of concrete sludge and small amount of cement. The use of concrete sludge can reduce usage of sand in bricks production and at the same time reduce the production cost. This also can help in protecting the environment in the long run by reducing sand mining activities.
Concrete Sludge Brick produce a comparable compressive strength to normal sand brick but with cheaper production cost. The production cost is approximately 30% lower compared to the normal sand brick. In term of density, Concrete Sludge Brick exhibit lower density compared to normal sand brick thus offer better handling on the site

Jejawi Perlis

ID : tm3007611047


DOMIGREASE : GREASE FROM DOLOMITE

"Dolomite (CaMg(CO3)2) is a pearly, translucent mineral, commonly colorless or white in color. It was named after the French mineralogist and geologist, de Dolomieu D. (1750-1801). Like the others, dolomite can be traced by its physical and chemical.
Dolomite is composed of 52.06% oxygen, 13.03% carbon, 13.18% magnesium, and 21.73% calcium. Iron and manganese carbonates, barium and lead are sometimes present as impurities. In cement industries, dolomite is an industrial waste.
Only a small portion of this industrial waste (dolomite) is used for general purpose such as to cover muddy land. A big fraction of the remaining waste however is not used and creating serious air pollution problems to local community. Hence, the used of the waste to produce greases will be able to overcome numerous problems, including the air pollution problems. Besides that, as a raw material, it is abundant and inexpensive.
The use of dolomite in production of grease can reduce the need for disposal. Besides that, as a raw material, dolomite is abundant and inexpensive. Therefore, it can reduce the grease production cost. Besides that, the grease is expected highly resistant to water and can be use for corrosion protection purpose. "

Jejawi Perlis

ID : tm3007711048


DOMIGREASE :Grease From Dolomite

"Dolomite (CaMg(CO3)2) is a pearly, translucent mineral, commonly colorless or white in color. It was named after the French mineralogist and geologist, de Dolomieu D. (1750-1801). Like the others, dolomite can be traced by its physical and chemical.
Dolomite is composed of 52.06% oxygen, 13.03% carbon, 13.18% magnesium, and 21.73% calcium. Iron and manganese carbonates, barium and lead are sometimes present as impurities. In cement industries, dolomite is an industrial waste.
Only a small portion of this industrial waste (dolomite) is used for general purpose such as to cover muddy land. A big fraction of the remaining waste however is not used and creating serious air pollution problems to local community. Hence, the used of the waste to produce greases will be able to overcome numerous problems, including the air pollution problems. Besides that, as a raw material, it is abundant and inexpensive.
The use of dolomite in production of grease can reduce the need for disposal. Besides that, as a raw material, dolomite is abundant and inexpensive. Therefore, it can reduce the grease production cost. Besides that, the grease is expected highly resistant to water and can be use for corrosion protection purpose. "

Jejawi Perlis

ID : tm3007811049


Easy Pyro-Reactor

Physical activation of biomass in adsorbent production is preferred due to its simplicity and low cost. However, the problems caused by physical activation on biomass are:
1. Complete combustion produced ash and reduce yield of activated carbon (adsorbent)
2. Existing furnace produced low adsorbent quality by heat activation.
3. Usage of gaseous and other auxiliary items caused high cost of adsorbent production (gas, steam)

Jejawi Perlis

ID : tm3007911050


Silica Nano-Tube Immobilized With Cyanex 272 For Environmental Application

In 1991, Iijima first reported the discovery of carbon nano tubes . Since then, some other nanotubes have been developed in succession because of their potential applications for electronic devices, catalysis, separation and optical devices, etc..
Silica nano-tube is prepared using template method followed by immobilized Cyanex 272. Metals recovery from printed circuit is studied. Due to having high surface and nano hollow structured, high efficiency towards metals recovery is achieved and as well as higher amount of Cyanex 272 was found to be trapped.
The immobilized nano tube can be used in diverse application such as selective separation of metals, recovery of high purity metal from its lean sources, removal of toxic metals from industrial waste, preconcentration of metals to improve detection limits and so on. Due to the providing a large surface area, this nano tube shows the high performances

Jejawi Perlis

ID : tm3008011051


Sugarsorb: Physical Treated Sugarcane Bagasse As Adsorbents For Treatment Of DYes Poluted Wastewater

Pigments and dYes represent one of the problematic groups to treat from several industrial wastewaters. They are mainly from dye manufacturing, textile finishing, food colouring, cosmetic, papers, batik and carpet industries. The textile industries, including batik industry in Malaysia is also contributing significantly to the problem.
The use of low cost, recycled waste and ecofriendly adsorbents has been investigated as an alternative method for replacement of currently expensive method for removing dYes from wastewater. In this study, sugarcane bagasse - an agro industry waste were used to remove the dYes from the aqueous solution in a batch reactor. The sulphuric acid treated sugarcane bagasse (SupaSORB) were used to adsorb dYes at a various parameters, namely contact time, adsorbent dosage, initial dYes concentration and pH. The optimum combination all these parameters were determined by using Design of Expert (DoE) software.
As sugarcane bagasse is easily available in the countryside, it has potential to be used for the small scale industries which produced dYes as their effluent, after it was being pretreated with formaldehyde and sulphuric acid.
The data maybe useful for designing and fabrication of an economically cheap treatment process using batch or stirred tank flow reactors for the removal of methyl red from diluted industrial effluent.

Jejawi Perlis

ID : tm3008111052


Trainee Haptic Dental Simulator with Force Feedback

A software system has been developed to help trainee dental doctors to prepare themselves for patient consultation. The environment in a dental room can be limited in space and quiet crowded with dental tools and equipment. Dentists have to be trained to position themselves in this working space such that they can maneuver easily to reach tools and move them around the mouth for teeth inspection. The current form of training using 3D models or real patients can be risky or anatomically monotonous. We propose a training system using 3D graphics to simulate a patients teeth and several dental tools in real-time. This system is currently not available in most dental training hospitals. The main technical feature of the proposed system is the use of an Haptic device to manipulate the tool and generate force feedback to the user. In order to do this accurate 3D models of patients teeth and dental tools are required. It is well known that faithful rendering of haptic force and graphic displays are difficult and often lead to instability. We improve on this by using efficient algorithms and high level libraries of low complexity. This combination is by itself novel. The results obtained are good with a rendering rate of more than to 40 FPS (graphics & force). The proposed system will be beneficial to the young dental community and hospitals. It can be a platform to introduce a new learning paradigm in the medical domain. The system also allows cost saving, time saving and improves quality of consultation. The trainee can repeat the exercises at no cost at all and at their preferred anatomical teeth.

Jejawi Perlis

ID : tm3008211053


X-Waste Brick: Novel Brick From Waste

X-waste brick is high silica waste material composed from palm ash, cement, sand and automotive waste. Brick produced has variety of useful benefit. X-waste brick are formulated from waste materials which exhibits high strength and almost 100% x-ray radiation proof. Volume friction of waste material is about 60-70% with total cost as low as RM0.08 per piece.

Jejawi Perlis

ID : tm3008811059


A GPS Guided Legged Robot for Mapping Areas of Impossible Human Entry

This invention is a product, a legged (walking) robot, which is useful for mapping the objects in certain areas where man cannot enter. These areas are unknown such as unexplored tunnels and debris that would have been created by calamity such as building collapse and earthquake etc. The robot is small in size and can travel within restricted places and map the objects that may be living or otherwise. The robot has several sensors. The sensor data are processed on robot computers and transmitted wireless to outside world. The robot has a specially designed Ultrasonic Sensor Bank (USB), a Global Positioning System (GPS) and an Electronic Campus (EC). The USB computes the range (distance between the sensors and the object) of objects around the robot, the GPS connects the robot to a maximum of six space satellites to compute its global position and the EC takes the job of GPS when the robot is inside a groove or under a ceiling where satellite signal is highly attenuated. Since the robot is legged, it can easily maneuver rugged path where wheeled robot is not suitable.

Jejawi Perlis

ID : tm3009811069


Aluminium-Polymer ABS Product

Material for aluminium product usually made from aluminiumscrap. Nowadays, the price of aluminium scrap is increased. The idea is now to minimize the cost of production via minimize the weight of the product without changing the form or the shape of product.
Aluminium and metal alloys are common and plenty. In this research , the idea is to combine aluminium with non metals (polymer). In this case Acrylonitrine Butadiene Styrene (ABS) was selected because of its low density and low melting temperature compared with aluminium. However, combining aluminium with ABS as alloys is unexplored off. The process is simple which is, by combining molten aluminium to ABS before casting. The product aluminium-ABS is then tested to study its mechanical properties (hardness and tensile strength and Its microscope.

Jejawi Perlis

ID : tm3010411075


Bio-Banana Trunk Absorbent

The utilization of lignocellulosic mostly residue of agriculture and agro-industries, allows a valorization of these wastes and a limitation of enviromental damages. Banana is one agriculture product in Malaysia. The agricultural activity generates a large amount of residue, because each plant produce only one bunch of bananas, after it's harvesting the bare pseudo-stem are cut and usually left in the soil plantation to be organic material. Bio-banana trunk is absorbent that can absorb oil. Bio-banana trunk is used to clean oil or oil spill on water and leave for a few minutes to allow time for it to absorb the oil.

Jejawi Perlis

ID : tm3010511076


Bio-Foam Composites from Industrial Waste

The large amounts of industrial waste such as paper sludge and waste paper has brought great pressure to environment. Generally most of waste paper is landfill, some waste paper is incinerated or used for farming. Therefore, putting the waste paper to changing waste materials into value product bio-foam composites and also can help to solve environment by humidity and the action micro-organisms. The advantages of waste paper materials such as low cost, the disposal of industrial waste, good mechanical properties and biodegradable.

Jejawi Perlis

ID : tm3011011081


Clay Filled Aluminum Product

- New Improved Aluminium Product
- Having lightweight
- For decorative Items (Fence Flowers)

Jejawi Perlis

ID : tm3014411115


Hexagonal LED Module For Display System

A hexagonal shape module to form multiple arrangement arrays by combination of modules on support panel. The modules are juxtaposed at the side edges with the lines aligned with each other on side faces of the modules. This makes it possible to arrange the modules in any desired array and even to take any modules out of the array. The polarity connection located at each side faces on module to allow electricity flow with the respective contacts between the modules. Finally the light output can be energized from a single source. In this system the hexagonal light emitted diode (LED) modules are connected together to form desire messaging sign.

Jejawi Perlis

ID : tm3015911130


Intelligent Brain Interface for a Robot Chair

Intelligent Brain Interface for a Robot Chair is a device which can help the paralyzed patients to drive a robot chair within their homes by using their brain signals. The Brain Interface makes use of the active brain functions of the patient to convert their thought signals into control signals to move the robot chair. Hence using only their thought the user will be able to steer the robot chair.

Jejawi Perlis

ID : tm3016211133


Intregrated Solar Powered Water Pump

This product is a prototype of solar powered water pump for small scale irrigation purpose such as paddy field. The power from solar module will energized the water pump through linear current booster which used to stabilize the current from solar module in day time. The water pumped from pond or water source into a water reservoir, and from water reservoir to irrigated area. Water level circuit used to control the water level in reservoir and water level at irrigated area which to ensure the field is not dry up or flood especially for paddy field. Since paddy plant very sensitive with water where the water is needed in certain period before harvest. This product is suitable for paddy fields which locate outside the granary area.

Jejawi Perlis

ID : tm3016911140


MAG: Magnetized Bio-Adsorbent

MAG is the latest biomaterial developed using nanotechnological advancement. It is novel, simple, fast and effective in dye-removal. Magnetic assisted separation is a promising technique for adsorption of difficult-to-handle samples. The application of magnetic particles is of special interest in relation to environmental as it improves separation of used adsorbents. MAG has been developed from rice husk, which have an ability to become effective adsorbents. The development of nano-ferum liquid modified rice husk into MAG has been achieved successfully.

Jejawi Perlis

ID : tm3018311154


Nutra - Biostrip For Herbal Analysis

The sensing system is a novel innovation based on virtual sensor device capable of real-time quality verification of test material. The design of Nutra-BioStrip uses Biomimetic Sensor Technology that mimics the human sensing mechanism whilst the virtual concept is a new non-physical measurement device that operates intelligently with any desktop or laptop PC. The quality of herbal material is sensed using Nutra-BioStrip, an array of non-specific polymer blended lipid membrane sensor, fabricated using thick film/T-shirt printing technology and classified by means of pattern recognition protocols. The new breakthrough "Virtual" sensing device is user friendly and run based on a sophisticated data acquisition programmer developed in-housed which provides a graphical user interface that gives interactive control of the physical parameter for real-time analysis of herbs.

Jejawi Perlis

ID : tm3018411155


Nutrient Controller for Precision Farming (Nutricon)

As the world's population hits 7 billion supplying adequate food economically, has become a major global concern. Although food economically, has become amajor global concern. Although large scale intensive farming has been around for many years, the need for a more synergistically holistic approach is urgently required - a means that provide a balance between maximum food production, minimum wastage, accommodating environmental concerns and complying with economic constraints.

Jejawi Perlis

ID : tm3018611157


Palm Composites : Composite Products From Palm Ash Waste

- New types of floor tiles (T) and partition board (PB)
- 6" x 6" (T) or 3' x 6' (PB)
- Floor covering/Partition wall

Jejawi Perlis

ID : tm3020611177


SIMPLE SILICON BASED BIO SENSOR

Unencapsulated silicon based resistors are potential bio-sensors. These resistors which are fabricated in large numbers on silicon are diced to form individual resistor. The effective resistance of this resistor is reduced when a resistive bio element is deposited on it, hence forms the basis for a sensor. By simple comparison, the characteristics of the source of bio-element are determined. Further, only a transduction circuit, a comparator and display are needed to form a simple bio-based instrument. Potential advantages of this sensor are low cost, simple and robust.

Jejawi Perlis

ID : tm3020711178


Simple Silicon Based Bio Sensor

Unencapsulated silicon based resistors are potential bio-sensors. These resistors which are fabricated in large numbers on silicon are diced to form individual resistor. The effective resistance of this resistor is reduced when a resistive bio element is deposited on it, hence forms the basis for a sensor. By simple comparison, the characteristics of the source of bio-element are determined. Further, only a transduction circuit, a comparator and display are needed to form a simple bio-based instrument. Potential advantages of this sensor are low cost, simple and robust.

Jejawi Perlis

ID : tm3021211183


SSDEM: Statistical Software for Fitting Distribution and Estimating Missing Values in Environment Data Set.

The first software that focused on estimating missing values. Uses the best mathematical equation to estimate the missing data (based on literature). Simple applications assist the user shorten the time needed for estimating missing values.

Jejawi Perlis

ID : tm3021911190


The efficient design of three phase transformer core

Transformer design with 60o degree cutting angle of T-joint is more efficient than the core with cutting angle of T-joint 45o, 23o and 90o. This design (i.e. 60o) was not yet assembled by any transformer manufacturing company in this area. The flux distribution in the core is more uniform compared to other T-joint. The no-load loss of the 60o also showed lowest compared to other T-joint.

Jejawi Perlis

Displaying 1 - 25 of 26

To Register New Technology and Product Click Here