Skip to main content
Type a word
Category of Technology / Product

ID : tm204151462


Novel Palm Oil Polyol to memory from bedding products - from Laboratory to Commercialization

This invention details the successful commercialization from laboratory production of palm oil polyol to memory foam bedding products. This invention is the first of its kind in the world and is based on 100% in-house technology.

Batu Pahat Johor

ID : tm204161463


Modified Palm Oil Polyol for fluidised foam used in upholstery and comfort products

Traditionally, the material used for upholstery and conform products are polyurethane foam, latex foam and cotton. In this invention, we managed to produce a fluidised foam suitable for above applications using modified palm polyol giving a latex feel and the light cotton characteristics.

Batu Pahat Johor

ID : tm3188412855


Wireless Switch Alarm Control

Wireless switch- alarm control is a multifunction switch can control any load up to 500 voltages using wireless remote control. Moreover than this, it can switch on and off the load at the adjust time. The system itself consist of transmitter circuit, receiver circuit, power supply and unit control.

Batu Pahat Johor

ID : tm3188512856


Web-Enabled Lean Qualiy Management Framework (Web-LQMF)

This product provides a much needed solution for enabling the achievement of quality, especially in the case of the construction industry. Web-LQMF is a tool for systemic self-assessment of the organisation's practices with regards to its performance. It is an online system that enables an organization to assess itself on core business practices as a first step towards achieving business excellence.

Batu Pahat Johor

ID : tm3188612857


Water Draining Road

Water Draining Road is a patent-pending road and drain system suitable for construction of sport facilities. Innovative exploitation of biomass silica, recycled Styrofoam, fly ash, foamed aggregate concrete and materials on site provides a cost effective and environment-friendly method for road construction on peat. Mix design nomograph incorporating foamed aggregate and self-leveling foamed concrete offer a unique total solution to the problems of durability of such construction Specification and construction drawings with emphasis on controlled density, strength and ground water level are prepared according to the properties of soil especially its moisture content.

Batu Pahat Johor

ID : tm3188712858


Water Distilling Roof

The system is designed to be a part of the KUIK cabin. It comprises anodized pressed metal collector plate in a double-glazed glass insulated casing. Cold water is allowed to flow over the glass beneath for a greater temperature difference to enhance condensation. It is packed together with other KIIK cabin component including the wall panel and the fastening system in a box. The source of water could be from harvested rainwater, ground water and other sources such as river and sea. The prototype can produce about 1000 mi/m2/day in a mid day ambient temperature of around 33oC. Its performance could be enhanced with electrical booster.

Batu Pahat Johor

ID : tm3188812859


Wall and Line Following Hexapod Robot

Hexapod Robot is a mechanical vehicle that moves on six legs and guided by lines and walls. A fuzzy logic control governs the robot to follow the line and the wall. This control algorithm is embedded into PIC16F877A microcontroller to create a wall and line follower behaviour. The Hexapod robot will move along the wall for about 40cm distance of no line is detected. When a line is present, the robot will move following the line. In a development, a simple 6-legged robot was used which involved 3 servo motor as actuator to leg movement. Infrared sensors were used to sense line and distance to the wall as the input variable for the controller. Based on these signals, the controller controls the turning angle of forward movements thus making the robot move forward and turn at the same time.

Batu Pahat Johor

ID : tm3188912860


Walk in Stability Chamber for Thermal Comfort and Productivity Studies

This Walk-in Stability Chamber (WiSC) was completely design on December 2006. A preliminary study was conducted to determine its characteristic and baseline data as it was a new and custom-made design. The manufacturing cost of the WiSC was RM300,000. The objective on commercialization of WiSC is to povide a facility and services in conducting and experiment related to temperature and humidity simulations. This WiSC consists of three rooms which are chamber room, control and a changing room. The chamber room equip with a cooling unit and heating unit which is the main system to create the desire climate and indoor enviroment. It is also include with a ducting system and a safety system. The main purpose of this chamber is to conduct and experiments and studies on Indoor Enviroment Quality (IEQ) including Indoor Air Quality (IAQ), human productivity and HVAC performance. Nevertheless, it also can be utilize to conduct studies in other field such as biologist experiment, media and ink testing, physical respond test to army and athelete, agriculture testing, test the quality of product and other that related to simulation of temperature and humidity. This WiSC was also participated in International Exposion of Research and Inventions of Institution of Higher Learning 2007 (PECIPTA 2007) and winning a Gold Award in Research and Inovation Fest 2007 at UTHM.

Batu Pahat Johor

ID : tm3189012861


Versatile Data Logger System

The Versatile Data Logger System is a cost effective solution for researcher and students for collecting various analog data depending on the sensor used. The interval of each reading can be selected on the device and will be stored in an MMC card. User ca easily take out the memory card and use a PC to read out the data. Data can then be manipulated using spreadsheet application for analysis. This device is battery operated making it portable and can be used almost anywhere.

Batu Pahat Johor

ID : tm3189112862


Versatile Bio-Polymer From Waste Cooking Oil (BIO-WOP)

Bio-WOP based on renewable resources can be used widely in many fields, as they are suitable for the production of membranes, films, fibers and foams. By designing and using different fabrication techniques the form of product ranging from high dense thin films to high dense thin films to high porosity solid polymer.

Batu Pahat Johor

ID : tm3189212863


Universal Tracking And Navigation System (U-trac)

The Universal Tracking and Navigation System (U-trac) is a telematic based security and navigation solution that is aimed to be a formidable solution to any kind of vehicle positioning needs. Ultimately, the aim of the project is to be able to pinpoint, immobilize or remotely control the particular target vehicle. U-trac is a very wide open ended solution. However, this first prototype solution is to serve as the proof of concept. Generally, the first part of the system is the GSM-GPS devise that incorporates the Rabbit 8-bit microprocessor as the brain of the system that will make the GPS oncore receiver able to communicate with the Modem embedded within. The device will receive the GPS oncore receiver able to communicate with the Modem embedded within. The device will receive the GPS signal and then sent the SMSes at certain preset interval to the server system. Another device (coined as the GSM-FTP) developed with also the 8-bit Rabbit microprocessor will incorporate the usage of its TCP/IP feature to establish an FTP session each time instructional data from the server is sent or navigational data are received from the GSM-GPS devise. Through the FTP session which is being made possible via Ethernet connection, the device will upload the navigational SMSes to the databases. Graphical interpretion of the navigational raw SMS strings in the databases will be done by the web based GUI developed on the PHP platform. The GUI is expected to be able to track vehicle installed with the devise graphically by interpreting the navigational data stored in the database. Currently, it is proven that it can be used as a fleet management solution due to the capability of the GUI to display multiple target vehicle transmitting the SMS to the system. Studies are also being made to establish the system to work in the GPRS and UMTS infrastucture since it will significantly reduce the operational and deployment cost of the system. This proposed system however is still undergoing development to be deployed on a better platform as such better databases, microprocessor and web API in order to help increase the GPS accuracy, security of the data transaction as well as the robustness of the system.

Batu Pahat Johor

ID : tm3189312864


Underride

When a passenger vehicle collides with the rear end or side of trucks, trailers or buses not equipped with effective guards (bumpers), it continues to travel beneath the taller chassis of the larger vehicle, the passenger vehicle "ride under" the larger one. Therefore, it is important task for us to provide a strong underride protection with low structural weight in order to additionally reduce fuel consumption. This new concept of underride is to introduce polymeric foam into the structures. According to previous research conducted by the author, it is found that by filling the foam into the structures, it is capable to absorb impact energy during the vehicle accident effectively.

Batu Pahat Johor

ID : tm3189412865


Ultra performance of lightweight concrete containing expended polystyrene beads (EPS) and pofa

Expanded polystyrene Beads (EPS) lightweight concrete is made from a expanded polystyrene beads and palm oil fuel ash (POFA) as partial cement replacement. In order to test the performance of eps lightweight aggregate, the comprehensive strength and water permeability test were conducted.

Batu Pahat Johor

ID : tm3189512866


Two-Stage Exhaust System

The 2-stage exhaust system consist of two different lengths of exhaust pipes that split approximately 0.5m from the exhaust ports. The best of low RPM, low-end torque and better top-end power can be achieved by routing the exhaust gas through different stages of the exhaust system. The routing of the exhaust gas is guided by a control mechanism to provide maximum efficiency of an internal combustion engine.

Batu Pahat Johor

ID : tm3189612867


Twin Head Turbine Ventilator

Twin head turbine ventilator (THTV) is basically an adaptation from the existing turbine ventilator (TV). The modification made is by adding an extra fan at the base of TV This fan is then joined to the air catch unit at the top of TV by a shaft. When the air blows through the air catch unit, the shaft with high speed bearing will rotate the fan. This invention has been proven can greatly improve the indoor Air Quality (IAQ) level of premises in terms of air temperature, air velocity, relative humidity,and CO2 concentration.

Batu Pahat Johor

ID : tm3189712868


Tunable Exhaust

Tuning an exhaust is deemed necessary when a new engine configuration is being researched and developed to obtain the best engine performance. The exhaust tuning process involves tedious work such as cutting and welding of the exhaust pipe. More problematic is that the tuning outcome is quite enpredictable, which make the process iterative and cost-consuming. Besides reducing research and development time and cost, a tunable exhaust may potentially be applied on the road to meet the torque and power requirement according to a certain load and driving characteristic.

Batu Pahat Johor

ID : tm3189812869


Top LRT

Design the composition of LRT(Lightweight Roof Tile) by waste lightweight aggregate (WLA) to investigate the inherent strength, durability and physical characteristic with surface coating by waste cooking oil bio-polymer doped superhydrophilic materials known as (TOP) to provide self-cleaning on LRT surfaces by photo-catalysis reaction and can easily be swept away by rain when the super-hydrophobic developed.

Batu Pahat Johor

ID : tm3189912870


Toothbrush Simulator

The toothbrush simulator use to determine the efficacy of plaque removal, the best brush surface pattern and the effect of frequency or force applied to the brush. It can also control its motion in linear or circular motion and applicable to versatile type of toothbrush (exclude power toothbrush).

Batu Pahat Johor

ID : tm3190012871


TimberMat: A Floating Foundation System

TimberMAT is a floating foundation system specially designed to support infrastructure on soft soils, like clay and peat. It consists of a natural timber mat sandwiched by lightweight soils, to serve as a (1) reinforced foundation, (2) load transfer platform, and (3) floating platform for construction. The design/product is in line with the philosophy of sustainable development, using natural elements and cost saving materials.

Batu Pahat Johor

ID : tm3190112872


Timber-Lightweight Concrete Composite Floor System

Malaysia is rich with tropical timbers that have excellent mechanical strength properties which can be used as the main building structure component. Some of the Malaysian timber is able to achieve greater strength to weight ratio than both steel and concrete. However, it is not fully utilized, and the use of Malaysian timber is mainly on furniture production and roof construction. In the Ninth Malaysian Plan, the Malaysian government encourages local developers to use Industrialized Building System (IBS) to reduce the dependence on unskilled foreign workers in the construction industry and provide better quality houses. Precast concrete system is one of the most common IBS used in the construction joints, and the combination between timber and leightweight concrete could be an IBS in our local building construction. An innovative floor system consisting of the use of Malaysian timber and lightweight concrete has been experimented and developed to provide an alternative floor system for building. This system is a combination of the use of Malaysian timber with an excellent flexural strength as the main beams and lightweight foamed concrete for the slab with good thermal and sound insulation properties. The composite action between timber and lightweight concrete is provided by the multiple choices of shear connectors. The floor systems demonstrate a superior structural system in its high structural efficiency as well as being easy to install. It can be applied in the renovation or extension of existing residential and historical buildings, and building for soft soil construction.

Batu Pahat Johor

ID : tm3190212873


Thermally Efficient Sustainable Hybrid Brick (TESH BRICK)

It is important to improve thermal performance of building envelope, as the energy efficiency of a building depends on the ability of the whole building envelope to retain internal heat as well as reduce heat loss and moisture movement from a building through the walls. Glass powder POFA have the potential to be used as supplementary cementitious wall material to replace cement which has a high level of embodied energy and is a cause for environmental concern. Also, fibers form oil palm residues are found to be a useful waste material that can be used to enhance the insulating property of walls . Thus, the developed TESH Brick has a unique combination of GP and POFA to provide strength because of its pozzolanic behavior, and the incorporation of fibers in the matrix to lower the heat transfer rate due to increase in porosity. Utilizing 85% locally available waste material in developing the TESH Brick products confirms its high degree of sustainability.

Batu Pahat Johor

ID : tm3190312874


The Innovation of Ultrasonic Vibration Machining Device

This innovation focused on the ultrasonic vibration technology to assist machining in wide range of application to improve the performance of manufacturing and machining. It promotes a dry cutting process thus help to keep industrial environment clean in green technology.

Batu Pahat Johor

ID : tm3190412875


The Incinerator Mulia Quran Mudah Alih Mobile Incinerator for the disposal of Islamic publication compliance with Sharia

The Incinerator Mulia Quran Mudah Alih is the upgraded version of the previous prototype incinerators that was designed, used and tested by the Jabatan Agama Johor (Islamic Religious Department of Johor) . It bypasses the time consuming shredding process whereby the Quran copies (booklet) can be incinerate directly with the capacity of 40 copies per burning. It is ergonomically designed, more user friendly, cost saving and complies with the C standards limits of the environmental quality (Cleanair) regulations.

Batu Pahat Johor

ID : tm3190512876


The Fastest Visualization Using Optical Tomography

This product is useful for industry as it can visualize the flowing object inside the pipeline noninvasively as fast as 6000 frame/s. It have sensing area which using optical sensor and use DE2-115 FPGA as it controller unit.

Batu Pahat Johor

ID : tm3190612877


The CHEcKER: A Tool for Checking Consostency of Data Flow Diagrams

The CHEcKER was developed to automate the consistency check between data flow diagrams (DFDs) based on syntax and semantics of DFDs. The CHEcKER serves two purposes, as an editor to draw the diagrams and as a checker to check the correctness of the diagram drawn. The consistency check from context diagram to lower-level data flow diagrams is embedded in the checker to overcome the manual checking problem.

Batu Pahat Johor

Displaying 1 - 25 of 209

To Register New Technology and Product Click Here